HPLC PT-LC3100

HPLC PT-LC3100

1. High Pressure Constant Flow Pump for Isocratic and Binary gradient 

• Flow rate range: 0.001-10.000 mL/min, in 0.001 mL increments
• Flow accuracy: ≤±0.2% (1.00ml/min, H2O,R.T.,8.5MPa)
• Flow precision: RSD≤0.075% (1.00ml/min, H2O,R.T.,8.5MPa)
• Maximum pressure: 45 MPa
• Pressure accuracy: ≤±3.0%
• Pressure pulsation: ≤0.1 MPa

Low-Pressure Gradient Unit for Quaternary

• Integrated vacuum degasser, 4 channel
• Composition rang: 0-100%
• Composition precision: ≤0.2% RSD
• Composition accuracy: ≤±2.0% 

2. UV detector

• Wavelength range: 190-700 nm
• Wavelength repeatability: ≤0.1 nm
• Wavelength accuracy: ≤±1.0 nm
• Bandwidth: 8nm
• Response time: 0.0 s-5 s
• Baseline noise: ≤±0.5×10-5 AU
• Drift: ≤1.0×10-4 AU/h (empty cell, 254 nm, 60 min)
• Path length: 10 mm(analytical cell)
• Light source: Deuterium Lamp 

3. Refractive Index Detector

• Flow cell type：2 chamber-type
• Measuring method：Deflection type
• Refractive Index range：00 to 1.75
• Measuring range：25 to 512μRIU
• Drift：2μRIU/h (Pure water 1mL/min, PURGE OFF)
• Linearity range：≥600μRIU
• Noise：≤2.5nRIU (Pure water, response : 1.5sec)
• Response：1 , 0.25 , 0.5 , 1 , 1.5 , 2 , 3 , 6 sec
• Cell volume：8μL
• Flow rate：(Usual) 0.2 to 3.0mL/min；(Max.) 10mL/min (solvent: pure water)

4. Evaporative Light Scattering Detector

• Light source: high intensity halogen lamp
• Detector: high sensitivity photomultiplier
• Analogue signal output: 0-1V
• Heating time:<10min heat-up to 150℃
• Temperature range: evaporation chamber max 150℃, increase by 1℃, nebulizer max 70℃
• Gas flow rate: 1-2L/min, recommended pressure 1-2bars
• Noise<1m Volt(1ml/min)
• Nebulizer type: venture tube 

5. Diode Array Detector

• 512 diodes
• Wavelength range: 190-760 nm
• Wavelength repeatability: ±0.1 nm
• Wavelength accuracy: ±1nm
• Baseline noise: ≤±1.0×10-5 AU (empty cell, 254 nm, 1.0 s)
• Drift: ≤2.0×10-4 AU/h (empty cell, 254 nm, 60 min)
• Path length: 10 mm (analytical cell)
• Light source: Deuterium Lamp and Tungsten Lamp 

6. Fluorescence Detector

• Light source: Xenon flash lamp
• Wavelength Range: 0, 200 nm to 650 nm (Dual wavelength simultaneous monitoring possible)
• Spectral Bandwidth: 20 nm
• Wavelength Accuracy: ±2 nm
• Wavelength Reproducibility: ±0.2 nm
• S/N: Water Raman peak S/N 1200 min
• Cell (capacity, pressure resistance, material): 12 µL; 2 MPa (approx. 20 kgf/cm2); SUS316L, PTFE (fluororesin), quartz

7. Autosampler

• Inject volumn range: 0-100 μL (standard)
• Precision: RSD <0.3%
• linearity: >0.999
• Sample residual: <0.01%
• Number of sample plates: Two of 60 position 2-mL vial plates
• Syringe: 500 μL

8. Column oven

• Column capacity: Three columns, up to 10mm internal diameter, up to
• 250mm length with guard column
• Temperature range: room temperature+5.0 to 80℃, settable in 0.1℃ increments
• Temperature accuracy: ≤±0.5℃
• Temperature stability: ≤±0.1℃ 

Optional column oven(cooling function)

• Column capacity: 3 columns up to 300mm length
• Cooling function temperature range: 5 to 80℃
• Normal temperature range: room temperature to 100℃
• Accuracy: 0.1℃
• Displayer: 4-digit LED

9. Workstation

• Internal and external standard calculation methods
• Automatically displays, prints, exports and starts other programs after the completion of a measurement.
• Comply with the requirements of the 21 CFR Part 11 directive of the FDA 

10. On-line degasser

• Maximum number of degassing Channel: 4
• Flow path ID: 1.143mm
• Internal volume: 480μL
• Wetted Materials: PEEK, Teflon® AF